LSRAM20 CR
Can't find what you're looking for? Go to the Product Selector
Shaft Support, Continuous Support Assembly, Low Profile, Predrilled, Class MM (h6), Zinc Plated Steel Rail and 440C Shaft, Cut To Length, Use with 20 mm Nominal Diameter Open Bushing Bearings
Lead Time:
Contact Factory
- Shaft supports simplify mounting of Thomson 60 Case shafts. Users of Thomson 60 Case shafting should consider the use of these shaft supports
- These supports can be used horizontally or vertically.
- Low Shaft Rails allow the design of more compact linear motion systems
- Class MM (ISO h6 tolerance) Shaft included
- Y1=Y2 is standard. Special Y1 and overall length can be specified by customer.
- Bolt down from top
- Consists of zinc plated steel rail and 440C stainless steel LinearRace shafting (HRC 50 min.).
- LSRAs do not use standard predrilled, “T1” or "T2", shafting. The shafting uses a different hole pattern and configuration
- Use only with Super Smart Ball bushing bearings.
| Dimension | Value |
|---|---|
| [d] Shaft, Nominal Diameter | 20 mm |
| [A] | 17 mm |
| [A1] | 8.5 mm |
| [A1] Tolerance | ± 0.002 mm |
| [A2] | ± 0.15 mm |
| [A2] | 8.3 mm |
| [H] | 22 mm |
| [H] Tolerance | ± 0.02 mm |
| [N] | 4.50 thru, 7.60 Dia C-Bore x 8.63 Deep |
| Recomended Bolt | M4 |
